Mensuration Formula Sheet
Mensuration questions in CAT ask for volumes and surface areas of standard solids, usually with a twist such as melting one solid into another or cutting a solid. Learn each formula with its condition and always keep units consistent.
Cube and cuboid
| Formula | When to use |
|---|---|
| Cube of side \(a\): volume \(= a^3\), lateral surface \(= 4a^2\), total surface \(= 6a^2\) | Any cube. |
| Cube space diagonal \(= a\sqrt{3}\); face diagonal \(= a\sqrt{2}\) | Longest rod that fits in a cubical box, or distance between opposite corners. |
| Cuboid: volume \(= lbh\), total surface \(= 2(lb + bh + hl)\), lateral surface \(= 2h(l + b)\) | Boxes, rooms and tanks. Lateral surface means the four walls only. |
| Cuboid space diagonal \(= \sqrt{l^2 + b^2 + h^2}\) | Longest rod that fits in a room or box. |
| \((l + b + h)^2 = (\text{diagonal})^2 + \text{total surface area}\) | When the sum of edges and the diagonal or surface area are given. |
Cylinder, cone and frustum
| Formula | When to use |
|---|---|
| Cylinder: volume \(= \pi r^2 h\), curved surface \(= 2\pi rh\), total surface \(= 2\pi r(r + h)\) | Right circular cylinder of radius \(r\) and height \(h\). |
| Hollow cylinder: volume \(= \pi h(R^2 - r^2)\) | Pipes and tubes with outer radius \(R\) and inner radius \(r\). |
| Cone slant height \(l = \sqrt{r^2 + h^2}\) | Right circular cone; needed before any cone surface area. |
| Cone: volume \(= \dfrac{1}{3}\pi r^2 h\), curved surface \(= \pi rl\), total surface \(= \pi r(l + r)\) | Right circular cone. Its volume is one third of the cylinder with the same base and height. |
| Frustum: volume \(= \dfrac{1}{3}\pi h(R^2 + r^2 + Rr)\) | A cone with its top cut off parallel to the base; \(R\) and \(r\) are the end radii. |
| Frustum: slant \(l = \sqrt{h^2 + (R - r)^2}\), curved surface \(= \pi(R + r)l\), total surface \(= \pi(R + r)l + \pi R^2 + \pi r^2\) | Buckets and lampshades. Drop the \(\pi r^2\) or \(\pi R^2\) term for an open end. |
| Cone from a sector: sector radius \(=\) slant height \(l\); arc length \(= 2\pi r\) | Folding a sector of a circle into a cone. |
Sphere and hemisphere
| Formula | When to use |
|---|---|
| Sphere: volume \(= \dfrac{4}{3}\pi r^3\), surface area \(= 4\pi r^2\) | Balls and spherical shells. |
| Hemisphere: volume \(= \dfrac{2}{3}\pi r^3\), curved surface \(= 2\pi r^2\), total surface \(= 3\pi r^2\) | Solid hemisphere; total surface includes the flat circular face. |
| Spherical shell: volume \(= \dfrac{4}{3}\pi(R^3 - r^3)\) | Hollow ball with outer radius \(R\) and inner radius \(r\). |
Shortcuts and traps
- Melting and recasting: volume is conserved, surface area is not. Number of small solids \(= \dfrac{\text{volume of big solid}}{\text{volume of one small solid}}\).
- Scaling: if every length is multiplied by \(k\), surface areas multiply by \(k^2\) and volumes by \(k^3\).
- Cutting adds surface: cutting a solid keeps the total volume but creates new faces, so total surface area goes up.
- Curved versus total: read whether the question wants curved (lateral) or total surface area, and whether a container is open at the top.
- Units: \(1 \text{ m}^3 = 1000\) litres and \(1 \text{ litre} = 1000 \text{ cm}^3\).