Coordinate Geometry Formula Sheet
Coordinate Geometry questions in CAT test distances, areas, slopes and straight lines, and occasionally the equation of a circle. Plot the points roughly before calculating; a sketch often rules out options straight away.
Points
| Formula | When to use |
|---|---|
| Distance \(= \sqrt{(x_2 - x_1)^2 + (y_2 - y_1)^2}\) | Length between two points; also to test for isosceles or right triangles. |
| Internal division in ratio \(m : n\): \(\left(\dfrac{mx_2 + nx_1}{m + n}, \dfrac{my_2 + ny_1}{m + n}\right)\) | Point on segment from \((x_1, y_1)\) to \((x_2, y_2)\) with \(AP : PB = m : n\). |
| External division in ratio \(m : n\): \(\left(\dfrac{mx_2 - nx_1}{m - n}, \dfrac{my_2 - ny_1}{m - n}\right)\) | Point outside the segment with \(AP : PB = m : n\), where \(m \neq n\). |
| Midpoint \(= \left(\dfrac{x_1 + x_2}{2}, \dfrac{y_1 + y_2}{2}\right)\) | The \(1 : 1\) case; also, diagonals of a parallelogram share a midpoint. |
| Centroid \(= \left(\dfrac{x_1 + x_2 + x_3}{3}, \dfrac{y_1 + y_2 + y_3}{3}\right)\) | Point where the medians of a triangle meet. |
| Area of triangle \(= \dfrac{1}{2}\left|x_1(y_2 - y_3) + x_2(y_3 - y_1) + x_3(y_1 - y_2)\right|\) | Three vertices known. Area 0 means the points are collinear. |
Straight lines
| Formula | When to use |
|---|---|
| Slope \(m = \dfrac{y_2 - y_1}{x_2 - x_1} = \tan\theta\) | Line through two points with \(x_1 \neq x_2\); \(\theta\) is the angle with the positive x-axis. |
| Point-slope: \(y - y_1 = m(x - x_1)\); slope-intercept: \(y = mx + c\) | Writing a line from a point and a slope, or from the slope and y-intercept \(c\). |
| Intercept form: \(\dfrac{x}{a} + \dfrac{y}{b} = 1\); area with the axes \(= \dfrac{1}{2}|ab|\) | Line cutting the x-axis at \(a\) and the y-axis at \(b\), both non-zero. |
| General form \(ax + by + c = 0\): slope \(= -\dfrac{a}{b}\) | Reading the slope directly, when \(b \neq 0\). |
| Parallel: \(m_1 = m_2\); perpendicular: \(m_1 m_2 = -1\) | Neither line vertical. A vertical line is perpendicular to any horizontal line. |
| Angle between lines: \(\tan\theta = \left|\dfrac{m_1 - m_2}{1 + m_1 m_2}\right|\) | Acute angle between two lines, when \(m_1 m_2 \neq -1\). |
| Distance from \((x_1, y_1)\) to \(ax + by + c = 0\): \(\dfrac{|ax_1 + by_1 + c|}{\sqrt{a^2 + b^2}}\) | Perpendicular distance from a point to a line. |
| Distance between \(ax + by + c_1 = 0\) and \(ax + by + c_2 = 0\): \(\dfrac{|c_1 - c_2|}{\sqrt{a^2 + b^2}}\) | Parallel lines written with the same \(a\) and \(b\). |
Circle
| Formula | When to use |
|---|---|
| \((x - h)^2 + (y - k)^2 = r^2\) | Circle with centre \((h, k)\) and radius \(r\). |
| \(x^2 + y^2 + 2gx + 2fy + c = 0\): centre \((-g, -f)\), radius \(= \sqrt{g^2 + f^2 - c}\) | General form; it is a real circle only when \(g^2 + f^2 - c > 0\). |
Shortcuts and traps
- Ratio order: in the section formula, \(m\) multiplies the coordinates of the second point; swapping them gives the wrong point.
- Match coefficients first: before using the parallel-lines distance formula, rewrite both lines so \(a\) and \(b\) are identical (for example, \(2x + 4y = 3\) becomes \(x + 2y = 1.5\)).
- Vertical lines: a vertical line has no slope, so \(m_1 m_2 = -1\) cannot be used; check vertical and horizontal cases separately.
- Absolute value: area and distance come out with a sign from the formula; always take the absolute value.
- Collinearity: three points are collinear if the triangle area is zero, or if two pairs of them have the same slope.